Which Ecoer Air handler works with the Ecoer thermostat to create the two-stage function? : Nemas Corp LLC

Which Ecoer Air handler works with the Ecoer thermostat to create the two-stage function? Print

Created by: Kevin Mena

Modified on: Mon, 29 Jun, 2020 at 11:19 AM

Both the G & E series have capabilities to do so.

The E series has G2 wire already set from TAP 1 of Fan Motor to CN7 on Main Control Board (Can come on CN8 by mistake from factory, please advise to move to CN7) and from there follows in to CN9 (which is the terminal for the themostat wires) that translates into the wire you connect to the G2 connection on our Thermostat.
While the G series G2 wire needs to be given separately from the factory and is hard wired from the thermostat's G2 connection directly to the motor connection at Tap 1.

Kevin is the author of this solution article.

Did you find it helpful? Yes No

Which Ecoer Air handler works with the Ecoer thermostat to create the two-stage function? Print